Article TPVC76

PVC caps for pole top

The low-density polyethylene (LDPE) caps are specifically designed to seal the upper end of light poles. They provide high mechanical resistance, ensuring long-lasting protection against weather exposure. Ideal for preventing the ingress of water and debris, these caps ensure the longevity and efficiency of light poles, contributing to minimal maintenance and a neat appearance.

Description
mm
mm
mm
TPVC76 Polyethylene Pole Caps 76 6 21,5

  • The caps are CE marked.

  • The material of the caps is low-density polyethylene (LDPE).

  • Dimensional tolerances for these low-density polyethylene (LDPE) caps are ±0.1 mm for sizes up to 100 mm and ±0.2% for sizes above. Angular tolerances are ±0.5°.

    • ISO 1133 – Plastics: Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.
    • ASTM D1505: Standard Test Method for Density of Plastics by the Density-Gradient Technique.
    • ISO 527/1A – Plastics: Determination of tensile properties – Part 1: General principles.
    • ISO 180/A – Plastics: Determination of Izod impact strength.
    • ISO 868 – Plastics and ebonite: Determination of indentation hardness by means of a durometer (Shore hardness).
    • ISO 75-2 – Plastics: Determination of temperature of deflection under load – Part 2: Plastics and ebonite.
    • ISO 306 – Plastics:Thermoplastic materials – Determination of Vicat softening temperature (VST).
    • DIN 53765: Determination of melting point using Differential Scanning Calorimetry (DSC).
    • ISO 9001: Quality management systems – Requirements.
Technical sheet
Article TPVC76

CLOSURE CAPS IN PVC model TPVC76

 

The polyethylene caps, model TPVC76, produced by NCM, are specifically designed to seal the upper end of light poles. Featuring high mechanical strength, they provide long-lasting protection against exposure to weather elements. These caps are ideal for preventing the entry of water and debris, ensuring the longevity and efficiency of the light poles.

Thanks to their sturdiness, they help maintain a neat appearance and reduce the need for maintenance. They represent a practical and effective solution to protect the ends of poles and preserve their integrity over time.

 

TYPICAL PROPERTY VALUES:

PROPERTY TYPICAL VALUES UNIT TEST METHODS
Melt Flow Rate at 190 °C and 2.16 kg 7.5 dg/min
at 190 °C and 5 kg 28 dg/min
Melt Volume Flow Rate (MVR) at 190 °C and 2.16 kg 10 ml/10 min
at 190 °C and 5 kg 33 ml/10 min
Density 920 kg/m³ ASTM D1505
MECHANICAL PROPERTIES
Tensile Test Break Strength 10 MPa
Tensile Modulus 130 MPa
Elongation at Break 120 %
Yield Strength 8 MPa
Notched Izod Impact at 23 °C 45 kJ/m²
at -30 °C 9 kJ/m²
Shore D Hardness 40 – ISO 868
THERMAL PROPERTIES
Heat Deflection Temperature at 0.45 MPa (HDT/B) 43 °C
Vicat Softening Temperature at 10 N (VST/A) 89 °C
DSC Test Melting Point 107 °C
Enthalpy Change 125 J/g

 

Dimensional Characteristics of PVC Closure Caps:

Diameter : mm  76
Head height : mm  6
Body height : mm  21,5

 

Specifications