Article PP6500
Wall support with wall plate
The brackets are structural components used to support and position lights in a lighting system. These accessories connect light sources to poles or support structures, allowing for effective light distribution. They are commonly used in street lighting systems, parking lots, and public areas.
The straight brackets with a bent wall plate, model PP6-500, produced by NCM, are made from 60 mm diameter tubes welded longitudinally by induction, using S235JR steel in accordance with UNI EN 10219-1-2. The brackets have a standard inclination of 5 degrees and are welded to a rectangular plate bent at a 90° angle, designed to be fixed to the wall.
They are supplied hot-dip galvanized by immersion in a molten zinc bath, in accordance with UNI EN ISO 1461.
Powder coating, performed according to the UNI EN ISO 12944 standard, is available upon customer request.
|
Description
|
mm
|
mm
|
mm
|
°
|
Kg
|
|
|---|---|---|---|---|---|---|
| PP6500 | Straight wall support with bent wall plate. | 60 | 500 | 3 | 5 | 3 |
-
The brackets are marked “CE” through the application of an adhesive label (No. 1608 CPD P028).
The brackets are produced by a company certified UNI EN ISO 9001:2015 and authorized to issue the CE marking, in accordance with current legislation (EU Regulation No. 305/2011). The label, certifying conformity with CE regulations and affixed to each pole, must include the following information: reference standard EN 40-5, manufacturer’s code, year of manufacture, product code, and the CE marking authorization certificate number.
-
The brackets are made of S235JR steel, with characteristics in compliance with the UNI EN 10219-1-2 standard.
-
The dimensional tolerances comply with the UNI EN 1090 standard.
-
- UNI EN 1461: Hot-dip galvanized coatings on finished ferrous products and steel articles.
- UNI EN 10219-1-2: Cold-formed welded hollow sections for structural use of non-alloy and fine-grain steels.
- UNI EN 3834: Quality requirements for fusion welding of metallic materials.
- UNI EN 1090-2: Execution of steel structures and aluminium structures. Part 2 – Technical requirements for steel structures.
- D.M. 17/01/2018: Update of the Technical Standards for Construction.
- Circular No. 7 21/01/2019: Instructions for the application of D.M. 17/01/2018.
- Legislative Decree 81/2008: Consolidated law on health and safety at work.
STRAIGHT BRACKETS WITH BENT WALL PLATE, model PP6-500
The straight brackets with a bent wall plate, model PP6-500, produced by NCM, are made from 60 mm diameter tubes welded longitudinally by induction, using S235JR steel in accordance with UNI EN 10219-1-2. These brackets have a standard inclination of 5 degrees and are welded to a rectangular plate bent at 90° to be fixed to the wall.
They are supplied hot-dip galvanized by immersion in a molten zinc bath, in accordance with UNI EN ISO 1461.
Dimensional characteristics of the straight brackets with bent wall plate:
| Projection | : | mm | 500 |
| Diameter | : | mm | 60 |
| Thickness | : | mm | 3 |
Dimensional Tolerances: UNI EN 1090.
Any painting, after galvanization, with a color selected by the Project Management, is applied using a thermosetting powder coating process. Each individual bracket will be protected with bubble wrap.