Article POL250P
Polygonal poles for large areas
The polygonal conical pole with base plate for large areas is made from sheet metal that is cut and press-bent, with the edges joined and longitudinally welded using an automatic welding process.
m
|
n
|
mm
|
mm
|
mm
|
mm
|
mm
|
n/mm
|
mm
|
kg
|
m²
|
m x m x m
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| POL250P | 25 | 16 | 542 | 120 | 4 | 186 × 45 | 710/25 | 16/M24 | 850 | 970 | 27,52 | 2,70 × 2,70 × 2,00 |
-
The poles are CE marked by means of an adhesive label (No. 1608 CPD P028).
The pole is manufactured by a company certified according to UNI EN ISO 9001:2015 and authorized to issue the CE marking in compliance with current legislation (EU Regulation No. 305/2011). The label, affixed to each pole and certifying conformity with CE regulations, must indicate: reference standard UNI EN 1090-1, manufacturer’s initials, year of production, product code, and CE marking authorization certificate number.
-
The poles are made of S355 JR steel with characteristics compliant with UNI EN 10025.
-
Dimensional tolerances comply with UNI EN 1090.
-
- UNI EN 1461 – Hot-dip galvanized coatings on fabricated iron and steel articles.
- UNI EN 10025 – Hot-rolled products of structural steels.
- UNI EN 15614 – Specification and qualification of welding procedures for metallic materials. Part 1: Arc and gas welding of steels.
- UNI EN ISO 15609 – Specification and qualification of welding procedures for metallic materials. Part 2: Gas welding specification.
- UNI EN 1090-2 – Execution of steel and aluminum structures. Part 2: Technical requirements for steel structures.
WELDED POLYGONAL POLE FOR LARGE AREAS (16 sides) model POL250P
The polygonal-section pole with base plate, model POL250P, produced by NCM, is made from sheet metal that is cut and press-bent, with the edges joined and longitudinally welded using an automatic welding process.
The pole, made in three sections, is provided with the following standard features:
. Hot-dip galvanization by immersion in molten zinc, in compliance with UNI EN ISO 1461.
. Welded base plate.
. Grounding hole/connection.
Materials:
The poles are made of S235 JR steel with characteristics conforming to UNI EN 10025.
The dimensional tolerances comply with the UNI EN 1090 standard.
Dimensional characteristics of the pole:
| Above-ground height | : | mm | 25000 | |
| Ø Base plate diameter / thickness | : | mm | 710/25 | |
| Base diameter | : | mm | 542 | |
| Top diameter | : | mm | 120 | |
| Thickness | : | mm | 4 |
CE Marking:
The poles are CE marked through the application of an adhesive label (No. 1608 CPD P028).
The pole is manufactured by a company certified under UNI EN ISO 9001:2015 and authorized to issue the CE marking in compliance with current legislation (EU Regulation No. 305/2011). The label, certifying compliance with CE regulations and affixed to each pole, must display: reference standard UNI EN 1090-1, manufacturer’s initials, year of production, product code, and the CE marking authorization certificate number.
Any additional painting, after galvanization, with colors chosen by the project supervisor, is achieved through a thermosetting powder coating process. Each pole will be protected with bubble wrap.