Article POL182
Polygonal lighting poles
The conical polygonal pole is made from sheet metal that is cut and press-bent, with the edges joined and longitudinally welded using an automatic welding process.
m
|
m
|
n
|
mm
|
mm
|
mm
|
mm
|
kg
|
m²
|
m x m x m
|
|
|---|---|---|---|---|---|---|---|---|---|---|
| POL182 | 18 | 1,3 | 16 | 488 | 120 | 4 | 186 × 45 | 649 | 19 | 2,50 × 2,50 × 1,60 |
-
The poles are CE marked through the application of an adhesive label (No. 1608 CPD P028).
The pole is manufactured by a company certified to UNI EN ISO 9001:2015 standards and authorized to issue CE marking according to current legislation (EU Regulation No. 305/2011). The label, certifying compliance with CE standards and affixed to each pole, includes: the reference standard UNI EN 1090-1, the manufacturer’s logo, year of production, product code, and the certification number authorizing CE marking.
-
The poles are made of S355JR steel in accordance with UNI EN 10025 standards.
-
Dimensional tolerances comply with UNI EN 1090 standards.
-
- UNI EN 1461 – Hot-dip galvanized coatings on fabricated iron and steel articles.
- UNI EN 10025 – Hot-rolled products of structural steels.
- UNI EN 15614 – Specification and qualification of welding procedures for metallic materials. Part 1: Arc and gas welding of steels.
- UNI EN ISO 15609 – Specification and qualification of welding procedures for metallic materials. Part 2: Gas welding specification.
- UNI EN 1090-2 – Execution of steel and aluminum structures. Part 2: Technical requirements for steel structures.
WELDED POLYGONAL POLE (16 sides) model POL182
The buried polygonal pole, model POL182, produced by NCM, is made from sheet metal that is cut and press-bent, with the edges joined and longitudinally welded using an automatic welding process.
The pole, made in two sections, is provided with the following standard features:
. Hot-dip galvanization by immersion in molten zinc, in compliance with UNI EN ISO 1461.
. Cable entry hole, measuring 186×45 mm, centered at 800 mm from the base.
. Grounding support for M10 bolt, positioned 1400 mm from the base.
. Slot for terminal block, measuring 186×45 mm, centered at 2300 mm from the base.
Materials:
The poles are made of S235 JR steel with characteristics conforming to UNI EN 10025.
The dimensional tolerances comply with the UNI EN 1090 standard.
Dimensional characteristics of the pole:
| Above ground height | : | mm | 18000 | |
| Burying | : | mm | 1300 | |
| Base diameter | : | mm | 488 | |
| Top diameter | : | mm | 120 | |
| Thickness | : | mm | 4 |
CE Marking:
The poles are CE marked through the application of an adhesive label (No. 1608 CPD P028).
The pole is manufactured by a company certified under UNI EN ISO 9001:2015 and authorized to issue the CE marking in compliance with current legislation (EU Regulation No. 305/2011). The label, certifying compliance with CE regulations and affixed to each pole, must display: reference standard UNI EN 1090-1, manufacturer’s initials, year of production, product code, and the CE marking authorization certificate number.
Any additional painting, after galvanization, with colors chosen by the project supervisor, is achieved through a thermosetting powder coating process. Each pole will be protected with bubble wrap.